EGR Blanking Plates for Discovery 4, Range Rover Sport, Jaguar XF, XJ, 3.0 TDV6/SDV6

This pair of laser cut 304 stainless Steel (2 in a kit, 1 kit per engine) EGR plates is suitable for all vehicles that run the 3.0 TDV6/SDV6 engine. They Fit in between the pipe and EGR valve which run to the inlet retaining that factory look (MOT Friendly). We have designed these with a slotted holes to make fitting far easier as you simply loosen the bolts and slide this plate in.

ALL vehicles will require the ECU software editing as well which we or any of our approved agents can do. Especially if you already have the engine management light on!

Please note: Do not drill holes in these blanks they are designed to be installed as is, stopping all flow from the EGR into the manifold.

These will fit the following vehicles
Discovery 4 - All 3.0 TDV6/SDV6 variants
Range Rover Sport - All 3.0 TDV6/SDV6 variants
Jaguar XF - All 3.0 TDV6/SDV6 variants
Jaguar XJ - All 3.0 TDV6/SDV6 variants

Message us for more info about your specific car.