EGR Fixing Part For 3.6 TDV8 Range Rover L322 & Range Rover Sport

This pair of laser cut 304 stainless steel (2 required for 1 engine) EGR plates will suit all vehicles that run the 3.6 TDV8 engine. They fit in-between the pipe and EGR valves which run to the inlet, retaining that factory look (MOT Friendly).

These sit at the bottom end of either pipe from the EGRs to the inlet manifold, and are held in place with the standard hooked gaskets for ease of fitment when reinstalling the pipes. These are easy to access once undoing the wiring harness from the top of the engine and moving the plate they attach too to one side. Approx. 30-45 mins per side.

All vehicles will require the ECU software editing as well which we can also do, especially if you already have the engine management light on.

Message us for more info about your specific car

Also please do not drill holes in these blanks they are designed to be installed as is, stopping the entire flow of exhaust gas.

These will fit the following vehicles
Range Rover L322 - 3.6 TDV8
Range Rover Sport - 3.6 TDV8