TD5 Crank Position Sensor – Lucas – NSC100790

Introducing our Genuine Lucas TD5 Crank Position Sensor with optional overlay harness repair, specifically designed for Defender and Discovery 2 models from 1998 to 2006. Unlike cheaper aftermarket options, these sensors are authentic OEM (Original Equipment Manufacturer) parts, ensuring optimal performance for your TD5 engine.

Commonly on older higher mileage TD5 models the crank sensor wiring sensor end can break down due to becoming brittle from repeated heat cycles and engine rock. This can lead to broken wires at the crank sensor end of the engine harness. which often causes intermittent running and starting faults down to a complete non start situation, Avoid that with our sensor and overlay harness kit!

These harnesses are built with high specification defence standard 61-12 part 4 screened cable. Wiring instructions supplied.

This corresponds to the following part numbers:
NSC100790

This will fit the following:
Defender TD5
Discovery 2 TD5

Harness Specification:

• Cores manufactured to ISO 6722-1:2011 (Class 105°C)
• Plain Copper Conductors to BS EN60228:2005 - PVC insulated.
• Single core suitable for use at temperatures from -40°C to 105°C with excursions up to 120°c.
• UL Approved Adhesive lined heat shrink UL 224 VW-1.
• Harnesses with anti-abrasion braided sleeve
• Operating Temperature Range: -50°C to 150°C, Melt Point: 250°C +/-5
• Tensile Strength: 100,000 PSI
• Flammability rating VW-1 flame retardant and halogen free.
• Shielded cables Operating temp. 0°C to + 70°C. Manufactured to MOD Def Stan 61-12 Part 4.
• Wiring harnesses are hand made in the UK. All cable is UK made and all components, where possible are UK sourced.