TD5 Crank Position Sensor Overlay Repair Harness

Discovery and Defender TD5 Repair Harness for the TD5 crank sensor. Damaged wiring stopping you from starting? you need this repair loom supplied with full instructions it will get you back on the road!

Please note the SENSOR is NOT included in this sale if you are wanting a sensor and loom please purchase from the link below

Sensor & Loom

These harnesses are built with high specification defence standard 61-12 part 4 screened cable. Wiring instructions supplied.

This corresponds to the following part numbers:
NSC100790

This will fit the following:
Defender TD5
Discovery 2 TD5

Harness Specification:

• Cores manufactured to ISO 6722-1:2011 (Class 105°C)
• Plain Copper Conductors to BS EN60228:2005 - PVC insulated.
• Single core suitable for use at temperatures from -40°C to 105°C with excursions up to 120°c.
• UL Approved Adhesive lined heat shrink UL 224 VW-1.
• Harnesses with anti-abrasion braided sleeve
• Operating Temperature Range: -50°C to 150°C, Melt Point: 250°C +/-5
• Tensile Strength: 100,000 PSI
• Flammability rating VW-1 flame retardant and halogen free.
• Shielded cables Operating temp. 0°C to + 70°C. Manufactured to MOD Def Stan 61-12 Part 4.
• Wiring harnesses are hand made in the UK. All cable is UK made and all components, where possible are UK sourced.

WATCH THE INSTALLATION VIDEO HERE OR ON YOUTUBE!